Sekonic SPEEDMASTER L-858D-U - Page 12

<HSS Flash Mode/Flash Duration Analysis Mode>
No. Description of mode
c
HSS (High Speed Synchro) ash cordless mode
Select this mode to measure the brightness of a ash activated in
HSS (High Speed Synchro) mode.
Detects ash brightness without meter-ash connection after
Measuring button pressed to arm meter for 90 seconds and ash
red separately, and displays F-stop value.
d
HSS (High Speed Synchro) ash radio triggering mode (for RT-GX only)
Select this mode to measure the brightness of a ash activated in
HSS (High Speed Synchro) mode.
Detects ash brightness after Measuring button is pressed to send
radio transmitted signal to radio receiver connected to ash. Displays
F-Stop value (When a transmitter sold separately is installed).
e
Flash duration analysis cordless mode
Detects ash brightness without meter-ash connection after
Measuring button pressed to arm meter for 90 seconds and ash
red separately, and displays ash duration time, graph of ash
wave form and F-stop value.
f
Flash duration analysis cord mode
Detects ash brightness with synchro cord meter-ash connection,
and displays ash duration time, graph of ash wave form and
F-stop value.
g
Flash duration analysis radio triggering mode
Detects ash brightness after Measuring button is pressed to
send radio transmitted signal to radio receiver connected to ash.
Displays ash duration time, graph of ash wave form and F-stop
value (When a transmitter sold separately is installed).
[Measuring Mode
Selection screen]
c
[HSS Flash Cordless
Mode Measuring screen]
Settings
Percentage
of ash
Measured
values
(F-stop values)
c
d
e
f
g
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com