SELFSAT Snipe Dome - Page 23

22
Fix cable holder on the car roof with 3 of M4x20
screws.
Apply silicone around and on the top of screws.
21
19
20
Tidy silicon.
Connect black cable to the controller(middle)
and grey cable to the receiver(Left).
Remove friction tape .
23
24
22
Apply silicone around the cable holder.
a.
b.
c.
Use controller cable(Black Color) and Cigar jack adaptor to connect to the Controller.
Fix the Controller Bracket at where you want.
Place the Controller on the Controller Bracket.
Fix the Controller Bracket (M4x16(2))