To Next PageTo Next Page
Need help?Do you have a question about the SELFSAT SNIPE PLATINUM and is the answer not in the manual?
Overview of the SNIPE PLATINUM system and its capabilities for automatic satellite alignment.
Guidelines for using the product safely and correctly, including speed limits and power requirements.
Important safety precautions to follow during installation and operation to prevent damage or injury.
Identification of all components included in the SNIPE PLATINUM package for user reference.
Illustrates how to connect the main unit, PI box, STB, and TV for proper system operation.
Details the functions of the PI box, including buttons, LEDs, and power modes for antenna control.
Explains sleep mode, BT pairing, MAC address selection, and power button operations for the remote control.
Covers power button logic, basic features, and operational status indicators on the remote control.
Guide to configuring DiSEqC settings and understanding satellite selection status on the remote control.
Describes error messages, additional functions, and mobile app pairing procedures for the remote control.
Instructions for downloading the SAT CONNECT app and pairing it with the antenna unit via Bluetooth.
Details on basic features and functionalities available within the SATCONNECT mobile application.
Addresses common problems like no power, remote control failure, satellite search issues, and mechanical faults.
Provides detailed physical dimensions for the SNIPE PLATINUM, PI box, and remote control.
Lists technical data including input frequency, antenna gain, power consumption, and Bluetooth specifications.
Details on required space around the antenna and necessary equipment for installation on vehicles.
Step-by-step guide for preparing the vehicle roof and installing the mounting plate using silicone and tape.
Instructions for assembling the mounting plate and applying silicone around bolts for secure attachment.
Procedure for installing the cable holder, drilling holes, and securing it to the vehicle roof.
Guide for connecting power, installing the PI box, and fixing the remote control bracket.
General
