To Next PageTo Next Page
Need help?Do you have a question about the SELFSAT SNIPE PRO and is the answer not in the manual?
General| Antenna Type | Flat Panel Antenna |
|---|---|
| Polarization | Linear |
| Frequency Band | Ku-band |
| Tracking | Automatic satellite tracking |
| Power Supply | 12V DC |
| Frequency Range | 10.7 - 12.75 GHz |
| Azimuth Adjustment | 360° |
| Gain | 33.7 dBi at 12.7 GHz |
| Operating Temperature | -20°C to +60°C |
| Mounting Type | Roof mount |
| Elevation Adjustment | 0-90° |
Describes the functions and operation of the SNIPE PRO auto skew satellite system.
Details the intended use, speed limits, power requirements, and manufacturer's instructions.
Covers essential safety precautions, intended purpose adherence, and liability disclaimers.
Illustrates how to connect the main unit, controller, receiver, and power source.
Explains the functions of power on, satellite selection, and satellite searching.
Provides a concise step-by-step guide for operating the satellite search function.
Shows the USB connection setup for firmware and satellite data updates.
Guides through downloading software and updating satellite data for the SNIPE PRO.
Provides detailed physical dimensions for both SNIPE PRO and SNIPE PRO MAX models.
Lists technical specifications including weight, gain, frequency, and operating temperature.
Details the necessary clearance and operational radius for installation and use.
Lists all the tools and components required for the installation process.
Step-by-step guide for mounting the unit, securing cables, and connecting components.
Explains how to properly connect the system to the vehicle's battery and ignition.
Presents a visual overview of the complete system connection for installation.
