EasyManuals Logo

SELFSAT SNIPE PRO User Manual

SELFSAT SNIPE PRO
133 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
FRENCH SPANISH DUTCH SVENSKA
3
ENGLISH GERMAN
It is not permitted to change the overall device by removing or adding individual components.
The use of any other components to those originally installed is not permissible.
Installation must only be performed by suciently qualied personnel. All instructions in the supplied Installation
Instructions, which is separately provided, must be carefully followed.
The product does not require any regular maintenance. Housings and enclosures must not be opened. Check and
maintenance work should always be carried out by a qualied specialist.
All of the relevant and approved guidelines of the automotive industry must be observed and complied with.
The equipment must only be installed on hard vehicle roofs.
Avoid to clean your vehicle with the mounted satellite system in a single-bay or drive-through car wash or with a
high-pressure cleaner.
Please also note the following instructions from the manufacturer :
1-2. Proper use and operation
This product has been designed for xed installation on vehicles with
maximum speeds of
130 km/h. It is designed to automatically aim an antenna at geostationary
television satellites.
The power to the system is supplied by a standard vehicle electrical system with a rated
voltage of 12 or 24 Volts DC.
Use of the equipment for any other purpose to the one specied is not permitted.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SELFSAT SNIPE PRO and is the answer not in the manual?

SELFSAT SNIPE PRO Specifications

General IconGeneral
BrandSELFSAT
ModelSNIPE PRO
CategoryAntenna
LanguageEnglish

Related product manuals