4
1-3. Safety Notes
In order to ensure that your SNIPE PRO works properly you must
ensure that it is following by the Operating Instructions in this
manual and used as intended purpose.
When it is correctly installed, the antenna automatically assumes
the rest position when the ignition is switched on and locks itself.
If the system cannot fully be removed due to user's negligence,
then it is your responsibility to check that the antenna is properly
stored in safe.
Please also note that dierent legal requirements are applied to
the operation of electrical and electronic equipment in dierent
countries. As the user of this equipment, you are responsible for
yourself ensuring compliance with the relevant laws and regulations.
The manufacturer does not take liability for direct or indirect
consequential damage of the system, motor vehicles or other
equipments by reason of unsuitable battery usage or erroneous
installation or wrong wire connection.
To Next Page
Loading...
Need help?
General