User operations
NETfon 130 - User Guide 723142012-A0-LM
42
8. User operations
8.1. Changing NETfon 130 settings
8.1.1. Customizing your password
To access the programming local menu (menu/enter button) and the call list (call list button)
you can customize a password in the following way:
1. press menu/enter
2. scroll the menu up to OPTIONS
3. press menu/enter
4. scroll the menu up to PASSWORD
5. press menu/enter
6. the first time you change the password you can enter up to 6 digits (view only asterisks “*”), then enter
the same password again to confirm it (if the digits are wrong the screen indicates the message
“Confirm error”); the following times it is possible to change it by entering a new one both for
(Password_) and (Confirm_) or cancel it by pressing menu/enter both for (Password_) and
(Confirm_), without entering any digits
7. to confirm press menu/enter
8. to return to the main menu, press ESC more times or wait until the timer elapses.
8.1.2. Customizing the rings
Set the rings from 13 melodies, for internal and trunk calls, in the following way:
1. press menu/enter
2. scroll the menu up to USER SETTINGS
3. press menu/enter
4. scroll the menu up to RINGING TONE
5. press menu/enter
6. choose between <Internal calls> and <Trunk calls>
7. to confirm press menu/enter
8. to choose scroll the 13 melodies
9. to confirm press menu/enter
10. to exit the menu press ESC
11. <Save the changes?> to save press menu/enter , to cancel press ESC .
To Next Page