User operations
NETfon 130 - User Guide 723142012-A0-LM
44
7. <Save the changes?> to save press menu/enter , to cancel press ESC .
(*)
General
It is the default ring pattern and does not change the ring set up by the user.
Meeting
It makes the ringer last only 2 seconds.
Silent
The ringer is off, the incoming call is signalled by the led flashing blue.
8.1.6. Adjusting handset, headset, speakerphone and ringer volume
Adjust the volume in the following way:
1. press menu/enter
2. scroll the menu up to USER SETTINGS
3. press menu/enter
4. choose one of the options: HANDSET VOLUME / SPEAKER VOLUME / RINGER VOLUME /
HEADSET VOLUME
5. the screen displays a status bar with the actual value, to make adjustment press UP or DOWN arrows
6. to confirm press menu/enter
7. to exit the menu press ESC
8. <Save the changes?> to save press menu/enter , to cancel press ESC .
8.1.7. Automatic enblock
Blocking the dialling of a call, gives the user the possibility to dial the phone numbers, display the digits and
decide when to proceed to make the call by pressing menu/enter key or by lifting the handset.
Automatic enblock is indicated by the presence of the icon ( ) on the stand-by screen of the phone.
The automatic enblock requires the "automatic hands-free" set and works only with the handset on hook.
Activate/Deactivate Automatic enblock in the following way:
1. press menu/enter
2. scroll the menu up to USER SETTINGS
3. press menu/enter
4. scroll the menu up to AUTOMATIC ENBLOCK
5. with UP and DOWN arrows select ACTIVE/NOT ACTIVE
6. to confirm press menu/enter
7. to exit the menu press ESC
8. <Save the changes?> to save press menu/enter , to cancel press ESC .
To Next Page
Loading...