User operations
NETfon 130 - User Guide 723142012-A0-LM
49
8.5. Available features with the handset in place
8.5.1. Enblock call
If you didn’t set the automatic enblock selection (standing up to switch off), you can use the enblock
selection service on a call: it is possible to use this feature only if requested.
8.5.2. Forwarding calls
The user can set up and cancel the service in the following way.
It is possible to set up / cancel three types of forwarding calls:
• Always = the call is forwarded immediately on its arrival to another number.
• On busy = the call is forwarded on its arrival to another number if the called is busy.
• On no reply = the call is forwarded on its arrival to another number if it remains
unanswered after a programmable period of time.
To: You have to:
Make an enblock call
Setting
1. press menu/enter
2. scroll the menu up to SERVICES
3. press menu/enter
4. choose ENBLOCK CALL
5. press menu/enter
6. enter the telephone number to call
7. dial the number by lifting the handset or by pressing menu/enter
(only from automatic handsfree mode).
8. to return to the main menu or cancel, press ESC more
times or wait until the timer elapses.
To Next Page