User operations
NETfon 130 - User Guide 723142012-A0-LM
47
Make a phone call from
corporate directory
The corporate directory can use contacts/speed numbers of SAMIP
system or of the LDAP server. Making a phone call can vary as
follows.
CORPORATE DIRECTORY uses the contacts of the system
It is possible to make a phone call from the address book of SAMIP
system (numbers and speed numbers[*]). Search the names in the
corporate directory by scrolling the list with the UP and DOWN
arrows button or by editing, with the alphanumeric keys, a name or a
part of it and then press menu/enter . Subsequently all the
stored names + telephone numbers + speed numbers, alphabetically
ordered, are displayed starting from the name required.
1. press menu/enter to access the corporate directory
2. scroll the menu up to MAIN TEL. BOOK
3. scroll the name/number with UP and DOWN arrows or edit a
name, or a part of it with the alphanumeric keysmake the phone
call by pressing menu/enter
[*] The telephone must be enabled to access the speed numbers
table which contains the name to call; if near the name there is an
“X”, it indicates that the number cannot be read and the call cannot
be made (customization up to the system administrator).
CORPORATE DIRECTORY uses the contacts of the LDAP server
1. press menu/enter to access the corporate directory and scroll the
menu up to MAIN TEL. BOOK
2. press menu/enter to confirm
3. enter the first three characters of the name to search and press
menu/enter to confirm (To move the cursor to the right side press
UP arrow.)
4. scroll the names of the list and press menu/enter when found
5. if more than one number, scroll the list, select one of them and
make the phone call by pressing menu/enter
Note: The configuration of server LDAP is up to the system
administrator.
Make a quick dial Program a function key with a contact of the local directory (even if
already programmed with another function) from FUNCTION KEYS->
FAST DIAL menu. By pressing the button for about 1.5 sec., you can
call the phone number associated.
Note: a number will be recalled by pressing the button for about 1.5
seconds. The name associated to the number, first is displayed
on the screen, so the user can decide to stop the call or continue
by pressing it to make the call.
End a phone call • return the handset to its cradle.
or
• from automatic handsfree mode press speakerphone
or
• press ESC
or
• from headset mode(2): press ESC .
To Next Page
Loading...