Selta SAEfon CL - Callback on no answer subscriber; Changing the enabling class with password

English
66 SAEfon CL - Operating instruction
- dial the “automatic callback” suffix
- wait for a tone of confirmation
The callback is signalled with a callback rhythm ringer.
To answer a callback from extension, lift the handset.
To answer a callback from a trunk line, lift the handset and dial the
telephone number (or the speed number if the callback was made
after a speed dialling).
10.5. Callback on no answer subscriber
To make a callback on no answer subscriber:
- if the subscriber does not answer dial the “automatic
callback” code , hang up the handset
- you will be advised with a special tone as soon as the desired
extension uses his telephone.
10.6. Changing the enabling class with password
To change your personal class with password:
- dial the “personal class of service change“ prefix
- dial your [personal password]
- confirm with the [#] key
- dial the number of the desired class:
•0 - AREA CLASS
•1 - 1
st
enabling class associated to the telephone
•2 - 2
nd
enabling class associated to the telephone
•3 - 3
rd
enabling class associated to the telephone
The acceptance of the service is signalled through a dedicated tone
on the handset.
www.commstel.ie