Selta SAEfon CL - Messages; Callback on busy subscriber;trunk line

SAEfon CL - Operating instruction 65
English
- when he answers, announce the conference and dial the “3-
way conference” code
Hang up if you want to leave the conference.
10.3. Messages
"Recall me" message
To leave a "recall me" message to an extension that is busy or does
not answer:
- dial the number of the extension
- dial the “send call message“ code
or
- press the MESSAGE function key
- wait for a tone of confirmation and then hang up.
Answer a message
To answer any type of message:
- lift the handset, you will hear the “acceptance tone of the
service”
- dial the “receive vocal or call invitation message” prefix
or
- press the MESSAGE function key
- if the message is a vocal type you listen to the recording (a
password can be required to enter the mailbox), if the
message is a “recall me” type, the extension which left the
message is automatically recalled.
10.4. Callback on busy subscriber/trunk line
If the called subscriber is busy it is possible to make a callback:
www.commstel.ie