Selta SAEfon CL - How to use the headset; How to modify date and hour of system

SAEfon CL - Operating instruction 71
English
10.13. How to use the headset
The service can be enabled in a standing way by the profile assigned
to the telephone or it is possible to activate it by pressing the
customized function key (the led lights up of fixed green colour) and
to deactivate it by pressing the same key (the led turns off):
- to make an outgoing call, press the key associated to the
RELEASE function and dial the subscriber’s number
- to answer an incoming call, after a ring, press the key
associated to the RELEASE function
- to end a call press the key associated to the RELEASE
function again.
10.14. How to modify date and hour of system
- To change date and hour, lift the handset or press the
loudspeaker key, if enabled
- press the [*] key, the current date is displayed, enter new
date and time, wait for tone of confirmation and release
- otherwise, if the code “*” is used for selection of others
services, dial “Display/modify system clock” prefix and
follow the procedure described for the [*] key.
www.commstel.ie