58 SAE
fon
- operating instructions
How to register the cost of a trunk call in progress to a cost code
After having established a trunk conversation,
place the called external subscriber on hold,
dial the “register cost” code , followed
by the number of the cost code, finally remove
the called subscriber from hold.
How to display the number of call meter units on your telephone
Lift the handset and dial the “display individual
call meter” code followed by your
telephone number.
The display will show your telephone number
followed by the text “TOTAL UNITS” and the
number of the call meter units.
How to permanently transfer your “service class” to another user
Lift the handset and dial the “class transfer”
code , followed by the digit “1” and
then enter your secret code; upon hearing the
trunk dialling tone, dial the desired number.
To cancel the service, dial the “class transfer”
code, followed by the digit “0” and then hang-
up.
How to temporarily transfer your “service class” to another user
Lift the handset and dial the “class transfer”
code , followed by the digit “2” and
then enter your secret code; upon hearing the
trunk dialling tone, dial the desired number.
By pressing the “release” key you can dial
without cancelling the service.
To cancel the service, hang-up.
To Next Page
Loading...
