66 SAE
fon
- operating instructions
KEY: key functions set up
By entering this menu it is possible to configure the function keys from KY01 to
KY16 (a pin code is required if it is personalized).
Select the key to be configured (i.e. KY01), press the enter key and select one of
the following menu:
LEX
line/extens. 1-24 func.
MISC
miscellaneous functions
N.U.
no one function programmed (with this menu is also possible
to delete the programmed function)
The LEX menu offers the user the possibility to associate a function key on each
of the telephones in an “Intercommunicating User Group”, to one of the 24 lines
(trunk or internal, identified by the field EIxx); select the line to be assigned and
press the “enter” key to ocnfirm selection.
The MISC menu offer to the user the possibility to assign one of the following
functions to the key:
EXCALL
external call feature
INCALL
internal call feature
MESSAG
message
DTCALL
data call feature
V/D SW
voice/data call feature
ALCALL
alarm call feature
CF
call forwarding feature
DND
do not disturb feature
PARK
call park feature
TRANSF
call transfer feature
FLASH
flash feature
INTERC
intercom call feature
RECALL
recall feature
RLS
clear forward
MIK
microphone function
PERDIR
phone book function
NORING
no ring function
HF
hands free
EXTL
external lamp
FUNC_1-10
function 1-10
DIRKEY
direct key abbrev. dial. (not programmable, it is used only
to verify the set up)
Select the function to be assigned to the key and press the “enter” key to confirm.
To Next Page
Loading...
