7. Installation
7.1 Telephone installation
1. Connect one end of handset coil cord to the handset base and the other end
to the base unit at (27). Connect one end of the telephone line cord to the
base unit at (26), and the other end to the wall outlet. In case your house is
not equipped with a compatible wall outlet, you may need an adaptor, or
you should consult your distributor/retailer for assistance.
2. Insert the removable base, running up in the suitable guides.
3. Telephone line installation
For initializing the phone at the first time usage, please connect the
telephone line from the wall outlet to the unit’s line jack to power it up by
telephone line power. The LCD display will change from low contrast to
normal contrast during power charging. And then user can operate the unit
with the following steps.
4. Wall Mount
This telephone set can be mounted on wall. To prevent the handset from
falling, take out the handset guide, rotate it for 180 degree, and then
re-insert it into the original place.
To Next Page
Loading...
