display “OUT OF AREA”. An incorrect incoming signal will display “ERROR”. If
it is a FSK format caller ID signal, the current month, date and time display will
be updated (while the year remains unchanged). If there is no information from
exchange, the name shown on the LCD will be same as that in the phone
book.
8.2.2 Checking incoming caller ID
User can use UP or DOWN key to view the information of the incoming calls
including phone number, date, and time. For fast scroll, press and hold UP or
DOWN key.
8.2.3 Re-dialing an incoming caller ID
For a local call, just press the REDIAL or SPEAKER /
key when the
caller’s number is on display. For a long distance call, press REDIAL key twice
to dial out the number with long distance number at the beginning.
8.2.4 Checking outgoing calls
User can use OUT key to view the outgoing numbers and duration of each call.
To re-dial, press SPEAKER key directly. For fast scroll, press and hold OUT
key.
8.2.5 Checking phone book
Press PHONE BOOK key and input the first character of name. You could
view the corresponding telephone numbers by pressing PHONE BOOK key
again. If no character input, you could use PHONE BOOK key to view in
sequence. To re-dial, press REDIAL or SPEAKER key directly.
8.2.6 Pre-dialing
Enter a phone number and press the REDIAL or SPEAKER / key to dial
out. For any input mistakes, press C key to correct.
8.2.7 Babycall dialing
Press any key except the OK key to dial out the pre-set number when BABY
CALL function has been turned on.
8.2.8 C key
1. In the setting mode, use it to correct any input mistakes or quit the setting.
2. In the pre-dialing mode, use it to correct any input mistakes.
3. When scrolling outgoing calls, use it to delete a phone number.
To Next Page
Loading...
