4. When scrolling incoming calls, press C key to delete a phone number. The
LCD will show DETELE, press OK key to confirm or press C key to quit.
Press and hold C key for 4 seconds to delete all the incoming calls. The LCD
will show DETELE, press OK key to confirm or press C key to quit.
5. When scrolling phone book, press C key to delete a phone book record.
The LCD will show DETELE, press OK key to confirm or press C key to quit
8.2.9 Phone number store
1. Two-touch memory
- on-hook + pre-dialing number + OK + N (N =1 ~ 9, 0, *, # )
- on-hook + incoming call + OK + N ( N = 1 ~ 9, 0, *, # )
- dial out: on-hook + MEM + N ( N = 1 ~ 9, 0, *, # )
2. Phone Book memory
- Incoming call + OK + PHONE BOOK + edit of phone book
8.2.10 Ringer volume control
Ringer volume can be adjust to 3 different levels of L / M / H by the slide switch
at the bottom.
8.2.11 Message indicator
This indicator will be turn on during incoming call or special signal from some
PBX.
8.3 Operation at off-hook state
8.3.1 Checking incoming and outgoing calls
You can use UP or DOWN key to view the information of the incoming calls
including phone number, date and time. Press OUT key to check outgoing call
record.
8.3.2 Dialing for display mode
During the number shown on LCD such as incoming call, outgoing call and
phone book memory, press SPEAKER /
key or pick up handset to dialing
out the number.
To Next Page
Loading...
