13. Turning On/Off the FM Radio
To turn on the FM radio, press and hold the Phone Button for 2 seconds until you hear a mid-toned
double beep sound.
14. Seeking Stations
Rotate while pressing the Jog Dial clockwise to search up the station dial or counter clockwise to search
down the station dial.
15. Listening to Preset Stations
Tap the Phone Button once to go upward to your next saved preset station.
16. Saving or Deleting Stations
1. To save the current station, press and hold the Jog Dial for 2 seconds until you hear a voice prompt,
“Preset (#)”.
2. Rotate the Jog Dial clockwise or counter clockwise, in order to select which preset number you want for
that specific station.
3. To save the current station, tap the Jog Dial again. You will then hear a voice prompt, “Save preset (#)”.
4. To delete the saved station in the preset number, tap the Phone Button. You will then hear a voice
prompt “Delete preset (#)”.
17-1. Settings
<Headset Settings>
To enter into voice configuration menu, press and hold the Jog Dial for 10 seconds until the LED shows
solid blue and you hear high toned double beeps.
<Camera Settings>
To enter into camera configuration menu, press and hold the Camera Button for 8 seconds until you hear
a voice prompt, “Camera setup”.
18. Factory Reset
If you want to restore the 10C EVO to factory default settings, press and hold the Phone Button for 10
seconds. Tap the Jog Dial. The headset automatically restores the default settings and turns off.
19. Installing the headset on your Helmet
Using the Clamp Unit
1. Loosen the two screws on the back plate of the clamp unit with the
included allen wrench.
2. Insert the back plate of the clamp unit between the internal
To Next Page
Loading...
Need help?
General
