Need help?Do you have a question about the Sena 10R and is the answer not in the manual?
General| Bluetooth | Bluetooth 4.1 |
|---|---|
| Talk time | 10 hours |
| Operating temperature | -10°C to 55°C (14°F to 131°F) |
| Bluetooth Profiles | HFP, HSP, A2DP, AVRCP |
| Battery Life | 10 hours talk time |
Instructions for attaching the main unit to the helmet using hook and loop fasteners or adhesive tape.
Guidance on attaching the speakers inside the helmet using hook and loop fasteners.
Instructions for installing either a wired boom or a wired microphone onto the helmet.
Steps for attaching the battery pack holder and the battery pack to the helmet.
Instructions for clipping the handlebar remote onto the motorcycle's handlebar.
Overview of the functions controlled by the headset and handlebar remote buttons.
Steps to power on and off the headset and the handlebar remote.
How to charge the headset and handlebar remote using USB or cigarette charger.
Methods to check the battery status using LED indicators and voice prompts.
Instructions on adjusting volume using the joystick and headset buttons.
Steps to pair the 10R with a mobile phone or Bluetooth stereo device.
Procedure for pairing a second mobile phone, GPS, or Sena SR10.
How to selectively pair for A2DP stereo music or HFP phone calls.
Instructions for pairing the 10R for A2DP stereo music only.
Instructions for pairing the 10R for HFP phone call only.
Procedures for pairing the 10R with other Sena headsets for intercom.
How to pair the 10R with other Sena models like 20S, SMH10, SMH5 for intercom.
How to answer, end, reject, and make calls using the headset.
Instructions for making calls using voice speed dial and last number redial.
How to listen to GPS instructions wirelessly via Bluetooth.
Using the SR10 adapter for two-way radio communication with intercom.
How to play, pause, and control music playback from Bluetooth devices.
Starting and terminating music sharing with an intercom friend.
How to start and end a two-way intercom conversation.
Method to terminate a two-way intercom connection.
How to establish and manage a three-way conference intercom.
How to terminate a three-way intercom or disconnect individual participants.
How to start and manage a four-way conference intercom.
How to terminate a four-way intercom or disconnect participants.
Steps to pair the 10R with non-Sena Bluetooth headsets for intercom.
Initiating two-way intercom conversations with non-Sena headsets.
Establishing a three-way intercom with two non-Sena headsets.
Connecting up to four users (10Rs and non-Sena) for intercom.
How to turn the FM radio on and off, and remember the last station.
Listening to saved FM radio preset stations.
Searching for stations and saving them to presets.
Automatically scanning for stations and saving them to presets.
Temporarily preset stations without altering existing presets.
Selecting the FM frequency region to optimize station scanning.
Steps to enter mobile phone pairing mode and pair the device.
Steps to enter second mobile phone pairing mode and pair the device.
Steps to enter phone selective pairing mode for specific profiles.
Steps to enter media selective pairing mode for audio devices.
Procedure for assigning phone numbers to speed dial slots.
How to enable or disable audio boost for volume adjustment.
How to enable or disable voice-activated phone answering.
How to enable or disable voice-activated intercom initiation.
Adjusting the sensitivity level for voice-activated intercom.
How to enable or disable voice prompts for various functions.
How to enable or disable RDS AF for improved radio reception.
How to enable or disable sidetone for voice feedback.
How to enable or disable advanced noise control for reduced background noise.
Procedure to clear all Bluetooth pairing records.
Procedure to enter remote control pairing mode.
How to restore the headset to factory default settings.
How to exit the voice configuration menu.
Troubleshooting steps for intercom connection failures and busy signals.
What to do when an intercom connection is lost and how to attempt reconnection.
How to restore the headset to factory default settings.
Steps to troubleshoot and re-pair a disconnected handlebar remote.
Quick reference for operating functions using the handlebar remote.
Quick reference for operating functions using the headset buttons.
Statement of compliance with the R&TTE Directive for the EU market.
Compliance statement for Industry Canada license-exempt RSS standards.
Information on proper disposal of electronic waste and batteries.
Recommendations for storing and maintaining the product to prevent damage.
Important instructions and precautions for using the product safely.
Important warnings and guidelines regarding the product's rechargeable battery.
Information on Sena's limited warranty coverage for the product.
Duration of the product's warranty and conditions for termination.
Legal notice and waiver of rights related to product usage and liability.
List of conditions under which warranty claims may be excluded.
Statement limiting Sena's liability for damages arising from product use.
Disclaimer of liabilities for damages occurring due to specific events.
Instructions on obtaining warranty service, free repairs, and full refunds.
To Next Page
