10R
29
English
7 STEREO MUSIC
7.1 Bluetooth Stereo Music
The Bluetooth audio device must be paired with the 10R by following
the
“Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo Device”
procedures described in the
section 5.1
. The 10R supports the Audio/
6IDEO 2EMOTE #ONTROL 0ROlLE !62#0 SO IF YOUR "LUETOOTH AUDIO
device also supports the AVRCP, you can use the 10R to remotely
control music playback. Not only can you adjust the volume but you
can also use functions such as play, pause, next track and previous
track.
1. To play or pause music, press the Joystick for 1 second until you
hear a double beep.
2. To adjust the volume, move the Joystick up or down.
3. To track forward or track back, move the Joystick left or right for
1 second until you hear a mid-tone single beep.
7.2 Music Sharing
You can start sharing music with an intercom friend using Bluetooth
stereo music during a two-way intercom conversation (please refer to
section 8.1, “Two-way Intercom”
). When you terminate music sharing,
you can go back to the intercom conversation. To start or terminate
sharing music, press the Joystick for 1 second during an intercom
conversation until you hear a double beep. To track forward or track
back, move the Joystick left or right for 1 second.
Note:
1. Both you and your intercom friend can remotely control music playback
such as track forward and track back.
2. Music sharing will be paused when you are using your mobile phone or
listening to GPS instructions.
3. In order to share music, make sure that you update both headsets with
the firmware that has the music sharing feature, and enable the EDR
setting in the Sena Device Manager.
To Next Page
Loading...
