Sena 10R - A2 DP Stereo Music Only Pairing; HFP for Phone Call Only Pairing; Intercom Pairing with Other Sena Headsets

10R
23
English
5.3.1 A2DP Stereo Music Only
1. Turn on the headset and press the Joystick for 5 seconds until the
,%$mASHESREDANDBLUEALTERNATELYANDYOUHEARMULTIPLEBEEPS
2. 7ITHINSECONDSTAPTHE&RONT"UTTONAGAINTHENTHE,%$mASHES
red and you hear “Media selective pairing”.
3. Search for Bluetooth devices on your smartphone. Select Sena
10R in the list of devices detected on your phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for the
PIN.
5.3.2 HFP for Phone Call Only
1. Turn on the headset and press the Joystick for 5 seconds until the
,%$mASHESREDANDBLUEALTERNATELYANDYOUHEARMULTIPLEBEEPS
2. 7ITHINSECONDSTAPTHE2EAR"UTTONAGAINTHENTHE,%$mASHES
blue and you hear “Phone selective pairing”.
3. Search for Bluetooth devices on your smartphone. Select Sena
10R in the list of devices detected on your phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for the
PIN.
5.4 Intercom Pairing
5.4.1 Pairing with Other 10R Headsets for Intercom
Conversation
The 10R can be paired with up to three other headsets for Bluetooth
intercom conversation.
1. Turn on the two 10R headsets (A and B) that you would like to pair
with each other.
2. Press and hold the Front Button of the headset A and B for 5
SECONDSUNTILRED,%$SOFTHEBOTHUNITSSTARTTOmASHRAPIDLY9OU
will hear a voice prompt, “Intercom pairing”.