Sena 10R - Advanced Selective Pairing (A2 DP or HFP)

10R
22
Note:
1. If the GPS is also your preferred Bluetooth stereo music source, you can
pair the GPS to the 10R by following the simple procedure in section 5.1,
“Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo Device”.
2. You have to use a motorcycle specific GPS, which transmits turn-by-turn
voice instructions to the headset by Bluetooth. Most automotive GPS
systems do not have this feature.
3. The Sena SR10 is a Bluetooth two-way radio adapter for group
communication, and uses Hands-Free Profile. The incoming audio from
the two-way radio via SR10 is heard in the background while having an
intercom conversation or a mobile phone call.
4. The GPS navigation or a radar detector could be connected to the SR10
by wire. The GPS voice instruction or the radar detector alarm is also
heard in the background via SR10 while having an intercom conversation
or a phone call. Please refer to the SR10 User’s Guide for details.
5.3 Advanced Selective Pairing - A2DP Stereo or
Handsfree
When you are using a smartphone, sometimes you may need to
selectively use the 10R for A2DP stereo music only or for mobile phone
handsfree only. These instructions are for advanced users who want to
PAIRTHE2TOTHEIRSMARTPHONESWITHONLYONESELECTIVEPROlLE!$0
for stereo music of HFP for phone calls.
If you have previously paired a mobile phone to the 10R, you must
CLEARTHEPREVIOUSPAIRINGLISTONBOTHDEVICESTHEMOBILEPHONEAND
the 10R. To clear the pairing list on the 10R, please do a factory reset
or following the pairing list clearing procedure described in
section
13.16, “Factory Reset” or 13.14, “Delete All Bluetooth Pairing
Information” . To clear the pairing list on the mobile phone, please refer
to the mobile phone manual . For most smartphones, delete the Sena
10R from the list of Bluetooth devices in the settings menu.