10R
43
English
Note:
1. You can save FM stations to presets before using FM radio. Connect the
10R to your PC and open the Sena Device Manager. It allows you to save
up to 10 FM station frequency presets on the 10R settings menu. You may
do the same operation by using the Sena Smartphone App.
2. You can still answer an incoming phone call and intercom while listening
to the FM radio.
11.4 Scan and Save
“Scan” is the function that automatically searches station frequencies,
starting from the current frequency and up. To use the scan function,
PLEASEFOLLOWTHEPROCEDURESBELOW
1. Double tap the Rear Button. Then the current station frequency
MOVESUPWARDTOlNDOTHERSTATIONFREQUENCIES
2. )FTHETUNERlNDSASTATIONITSTAYSATTHESTATIONFREQUENCYFOR
seconds, then scanning to the next station frequency.
3. Scan function stops when you double tap the Rear Button again.
4. To save a station while scanning frequencies, tap the Rear Button
when at that station. You will hear a voice prompt from the 10R,
“Save preset (#)”. The station will be saved as the next preset
number.
5. All stations preset during “Scan”, will overwrite previously set
stations.
11.5 Temporary Preset
With the temporary preset function, you may temporarily preset
stations automatically without changing the existing preset stations.
Tap the Rear Button three times to automatically scan for 10 temporary
preset stations. The temporary preset stations will be cleared when the
system is powered off.
To Next Page
Loading...
Need help?
General
