Sena 10R - Media Selective Pairing Settings; Assigning Speed Dial Numbers

10R
48
13.4 Media Selective Pairing
Voice Prompt
“Media selective pairing”
Factory Default N/A
To go into media selective pairing mode, move the Joystick up or
down until you hear the voice prompt, “Media selective pairing”.
Please refer section 5.3.2, “HFP for Phone Call Only” for details on
media selective pairing. If you move the Joystick up or down, you can
exit from the media selective pairing mode.
13.5 Assigning Speed Dial
Voice Prompt
“Speed dial”
Factory Default N/A
Execute Tap the Rear Button
1. To assign a phone number as a speed dial, move the Joystick up
or down until you hear a voice prompt, “Speed dial”.
2. Tap the Rear Button, and you will hear a voice prompt, “Speed
dial one” and “Phone connected”.
3. Move the Joystick up or down to select one of three speed dial
numbers and you hear a voice prompt, “Speed dial (#)”.
4. Call a phone number you want to assign and you will hear a
voice prompt, “Save speed dial (#)”. The phone number is
automatically assigned to the selected speed dial number. Then
the phone call will hang up before being connected.
5. To exit the menu, move the Joystick up or down until you hear a
voice prompt, “Cancel”ANDTAPTHE2EAR"UTTONTOCONlRM9OU
will then hear a voice prompt, “Cancel”. If no button is pressed
WITHINMINUTETHE2WILLEXITTHECONlGURATIONMENUANDGO
back to stand-by mode.