Sena 10R - Enabling;Disabling RDS AF; Enabling;Disabling Sidetone; Enabling;Disabling Advanced Noise Control

10R
52
13.11 Enabling/Disabling RDS AF
Voice Prompt
“RDS AF setting”
Factory Default Enable
Enable Tap the Rear Button
Disable Tap the Front Button
RDS AF allows a receiver to re-tune to the second frequency location
WHENTHElRSTSIGNALBECOMESTOOWEAK7ITH2$3!&ENABLEDONTHE
receiver, a radio station with more than one frequency can be used.
13.12 Enabling/Disabling Sidetone
Voice Prompt
“Sidetone”
Factory Default Disable
Enable Tap the Rear Button
Disable Tap the Front Button
Sidetone is audible feedback of your own voice. It helps you to
naturally speak at the correct level according to varying helmet noise
conditions. If this feature is enabled, you can hear what you are
speaking during an intercom conversation or a phone call.
13.13 Enabling/Disabling Advanced Noise Control™
Voice Prompt
“Noise control”
Factory Default Enable
Enable Tap the Rear Button
Disable Tap the Front Button
When Advanced Noise Control is enabled, the background noise is
reduced during an intercom conversation. When it is disabled, the
background noise is mixed with your voice during intercom.
Note:
If you use your 10R with the Bluetooth Audio Pack for GoPro, you can
enable or disable this feature only during Normal Audio Recording Mode.
This feature is automatically disabled while in Ultra HD (UHD) Audio Mode.