Sena 10R - Speed Dialing

10R
27
English
6.2 Speed Dialing
You can quickly make a phone call by using the voice speed dial
menu.
1. To enter into the voice speed dial menu, double tap the Rear
Button and you will hear a mid-toned single beep and a voice
prompt, “Speed dial”.
2. Move the Joystick up or down to navigate between the menus.
You will hear voice prompts for each menu item.
3. 4APTHE2EAR"UTTONTOSELECTAVOICEMENUAMONGTHEFOLLOWINGS
(1) Last number redial (4) Speed dial 3
(2) Speed dial 1 (5) Cancel
(3) Speed dial 2
4. After selecting the last number redial menu, you will hear a voice
prompt, “Last number redial”. Then, to redial the last phone call
number, tap the Rear Button.
5. To call one of the speed dials, move the Joystick up or down
to navigate between the menus until you hear a voice prompt,
“Speed dial (#)”.
6. If you want to exit the speed dial immediately, move the Joystick
up or down until you hear voice prompt, “Cancel”, and tap the
Rear Button. If you do not press any button within 15 seconds, the
10R will exit the voice speed dial menu and go back to stand-by
mode.
Note:
1. Make sure that you connect the mobile phone and the headset to use the
speed dial function.
2. You need to assign speed dial numbers before using the speed dial
(please refer to section 13.5, “Assigning Speed Dial”).