Need help?Do you have a question about the Sena SPIDER RT1 and is the answer not in the manual?
General| Charging Time | 2.5 hours |
|---|---|
| Intercom Range | Up to 2 km (1.2 miles) |
| Operating Temperature | -10°C to 55°C (14°F to 131°F) |
| Type | Bluetooth Intercom |
| Operating Distance | Up to 2 km (1.2 miles) |
| Intercom Group Size | Up to 4 riders |
Lists key features like Bluetooth 5.1, Mesh Intercom range, Audio Multitasking, and Music Sharing.
Details the physical components of the headset, showing buttons and ports.
Lists all items included in the product package, with images.
Instructions for mounting the main unit using hook and loop fasteners.
Steps for attaching the speakers inside the helmet using fasteners.
Instructions for installing the wired boom and wired microphones.
Guidance on unfolding and positioning the mesh intercom antenna.
Information on downloading the SENA MOTORCYCLES App and Sena Device Manager.
Details on how to charge the headset and its fast charging capabilities.
Explains the meaning of icons and terms used in the manual.
Instructions for turning the headset on and off using button combinations.
How to control volume levels for different audio sources.
Method for checking the headset's battery status.
Describes three methods for pairing the headset with a mobile phone.
Steps for pairing a second mobile phone, GPS, or SR10 device.
Instructions for pairing a GPS device with the headset.
How to answer, reject, end, and make calls using the headset.
Instructions on assigning and using speed dial presets for quick calling.
How to play, pause, and control music tracks via Bluetooth.
Steps for sharing music with another Mesh Intercom participant.
Explains the Mesh Intercom system, its capabilities, and range.
Instructions for enabling and disabling Mesh Intercom on the headset.
Details on managing channels and communication within Open Mesh.
Procedures for creating and joining private groups in Group Mesh.
How to enable or disable the microphone during Mesh Intercom.
Switching between Open Mesh and Group Mesh modes.
Steps to reset the Mesh Intercom function to default settings.
How to access and navigate the headset's configuration menu.
Using the Sena Device Manager or app for advanced settings.
Adjusts the decibel level of different audio frequency ranges.
Enables answering calls using voice commands or blowing into the microphone.
Adjusts the sensitivity level for voice activation features.
Controls sensitivity for lowering music volume during intercom conversations.
Manages volume reduction of overlaid audio during intercoms.
Enhances audio quality for crisp and clear phone calls.
Controls voice prompts for various headset functions.
Procedure to reset the headset unit without affecting factory settings.
Restores the headset to its original factory default settings.
To Next Page
