Sena SPIDER RT1 - Troubleshooting Guide; Fault Reset Procedure; Factory Reset Procedure

SPIDER RT1 Motorcycle Mesh Communication System | 34
11. TROUBLESHOOTING
Please visit sena.com for more troubleshooting information.
• Customer Support: sena.com
11.1 Fault Reset
When the headset is not working properly, you can easily reset the unit:
1. Locate the Pinhole Fault Reset Button at the bottom of the main
unit.
2. Gently insert a paperclip into the hole and tap the Pinhole Fault
Reset Button with light pressure. The headset will shut down.
Note: Fault Reset will not restore the headset to factory default
settings.
11.2 Factory Reset
To erase all of your settings and start fresh, the headset can be restored
to factory default settings using the Factory Reset feature.
1.
=
10s
HOLD
“Configuration menu”
2.
=
2x
TAP
“Factory Reset”
3.
=
1x
TAP
“ Headset reset,
good-bye”
CHAPTER