SPIDER RT1 Motorcycle Mesh Communication System | 10
2 INSTALLING THE HEADSET ON YOUR HELMET
2. Peel off the cover from one side of the double sided adhesive tapes
for main unit and attach it to the back plate of the main unit.
3. Insert the back plate of the clamp between the internal padding and
external shell on the left side of the helmet.
2.2 Installing the Speakers
1. Peel off each cover of the hook and loop fasteners for speakers to
expose the adhesive surface. Then, attach the fasteners to the ear
pockets inside the helmet.
2. Attach the speakers to the hook and loop fasteners for speakers
inside the helmet.
To Next Page
Loading...
