Sena SPIDER RT1 - Bluetooth Device Pairing; Phone Pairing

SPIDER RT1 Motorcycle Mesh Communication System | 17
4. PAIRING THE HEADSET WITH OTHER
BLUETOOTH DEVICES
When using the headset with other Bluetooth devices for the first time,
they will need to be “paired.” This enables them to recognize and
communicate with one another whenever they are within range.
The headset can pair with multiple Bluetooth devices such as a mobile
phone, GPS, MP3 player or Sena SR10 Two-Way Radio Adapter via
Mobile Phone Pairing, Second Mobile Phone Pairing and GPS
Pairing.
Mobile
Phone
MP3
Player
GPS
Devices
Sena
SR10
4.1 Phone Pairing
There are three ways to pair the phone.
4.1.1 Initially Pairing the SPIDER RT1
The headset will automatically enter the phone pairing mode when you
initially turn on the headset or in the following situation:
• Rebooting after executing Factory Reset.
1. Press and hold the Center Button and the (+) Button for 1 second.
=
1s
HOLD
Blinking
“Phone Pairing”
Note:
• The phone paring mode lasts for 3 minutes.
• To cancel phone pairing, tap the Center Button.
CHAPTER