SPIDER RT1 Motorcycle Mesh Communication System | 33
10 CONFIGURATION SETTING
10.2.5 Audio Overlay Volume Management (Default: Disable)
The music overlaid audio reduces in volume whenever there is an ongoing
intercom conversation. If Audio Overlay Volume Management is
enabled, the volume level of the overlaid audio will not be reduced during
an intercom conversation.
10.2.6 HD Voice (Default: Enable)
HD Voice allows you to communicate in high-definition during phone
calls. This feature increases the quality so that the audio will be crisp
and clear during phone call conversations.
If this feature is enabled, incoming phone calls will interrupt intercom
conversations and audio from the SR10 will not be heard during
intercom conversations.
Note: Refer to the manufacturer of your Bluetooth device that will be
connected to the headset to see if it supports HD Voice.
10.2.7 Voice Prompt (Default: Enable)
You can disable voice prompts by software configuration settings, but
the following voice prompts are always on.
- Headset configuration settings menu, battery level indicator, speed
dial
To Next Page
Loading...
