Sena 10R - Setting Intercom Vox Sensitivity; Enabling;Disabling Voice Prompts

10R
51
English
13.9 Setting Intercom Vox Sensitivity
Voice Prompt
“VOX sensitivity”
Factory Default 3
Level Adjustment
Move the Joystick up or down
^
Apply Tap the Rear Button
Move the Joystick up or down until you hear the voice prompt, “VOX
sensitivity”. By tapping the Rear Button, it will lead you to the level
adjustment mode. If you enter the mode, you will hear a prompt stating
the current VOX sensitivity level. You may adjust the VOX sensitivity
level by moving the Joystick up or down. Level 5 is the highest
sensitivity setting and 1 is the lowest. After you have completed the
setting, tap the Rear Button to apply the changes.
13.10 Enabling/Disabling Voice Prompts
Voice Prompt
“Voice prompt”
Factory Default Enable
Enable Tap the Rear Button
Disable Tap the Front Button
9OU CAN DISABLE VOICE PROMPTS BY CONlGURATION SETTING BUT THE
following voice prompts are always on.
– 6OICEPROMPTSFORCONlGURATIONSETTINGMENU
– Voice prompts for battery level indicator
– Voice prompts for speed dial
– Voice prompts for FM radio functions