Sena 10R - Page 24

10R
24
3. Tap the Front Button on any one of the two headsets A and B,
and wait unit the LEDs of both headsets turn to blue and intercom
connection is automatically established. The two 10R headsets A
and B are paired with each other for intercom conversation. If the
pairing process is not completed within one minute, the 10R will
return to stand-by mode.
A
B
C
D
Pairing A & B
4. You can make other pairing between headsets A and C, and
between headsets A and D by following the same procedure as
above.
5. The intercom pairing queue is ‘Last-Come, First-Served ’. If a
headset has multiple paired headsets for intercom conversations,
the last paired headset is set as ſTUV KPVGTEQO HTKGPF. The
previous intercom friend becomes second intercom friend, and
third intercom friend.
Note:
For example, after the pairing procedures listed above, headset D is the
ſTUV KPVGTEQO HTKGPF of headset A. Headset C is the second intercom
friend of headset A, and headset B is the third intercom friend of headset
A.