Sena 10R - Ending Four-way Intercom

10R
34
8.3.2 Ending Four-way Intercom
As same in the case of three-way intercom, you can completely get out
of the four-way conference intercom or just disconnect a single
intercom connection.
1. Press the Front Button for 1 second until you hear a beep
to terminate four-way conference intercom. It terminates the
intercom connections between you (A), and your intercom friends
(B) and (C).
2. Tap or double tap the Front Button to disconnect the intercom
connection with one of the two intercom friends accordingly.
However, when you disconnect the second friend (C) by double
tapping the Front Button, you will be disconnected with the third
participant (D) as well. This is because the third participant (D) is
connected with you via the second friend (C).
Front Button Operation Result
Press for 1 second Disconnect (B), (C) & (D)
Single tap Disconnect (B)
Double tap Disconnect (C) & (D)
End Four-way Intercom
Function Handlebar Remote Headset
#ALLlRST
intercom friend
Tap the Front Button Tap the Center Button
Call second
intercom friend
Double tap the Front
Button
Double tap the Center
Button
Call third
intercom friend
Triple tap the Front Button
Triple tap the Center
Button
End two-way
intercom
Tap the Front Button Tap the Center Button
End all
intercoms
Press the Front Button for
1 second
Press the Center Button
for 1 second
Button Operation Table for Intercom