Sena 30K-01 - Page 14

Helmet
Installation
Using the
Glued Surface
Mounting
Adapter
Switching the
Microphone
Earbuds
External Mesh
Intercom
Antenna
30K Motorcycle Bluetooth Communication System | 14
2. InstallIng the
headset on
Your helmet
MENU
• Make sure that the microphone is located
properly close to your mouth when you
wear the helmet. Adjust the direction of
the microphone so that the n side of the
microphone is facing outward, away from your
lips.
Clamp Unit
Allen Wrench
Fin
Hook FastenerFoam Speaker Cover
3. Attach the headset main unit to the clamp unit.
Slide the main unit down onto the clamp unit
until it clicks rmly into the bottom portion of the
clamp unit.
4. To remove the main unit from the clamp unit,
press the Quick Release Button to slide it off the
clamp unit.