Sena 50S-01 - Joining an Existing Group Mesh

50S Motorcycle Bluetooth Communication System | 31
7 MESH INTERCOM
2. The headsets complete Mesh Grouping and automatically switch
from Open Mesh to Group Mesh.
“Group Mesh”
D
C
B
A
Group MeshOpen Mesh
Note:
• If the Mesh Grouping is not completed within 30 seconds, users
will hear a voice prompt, “Grouping failed”.
• If you want to cancel during the Mesh Grouping, tap the Mesh
Intercom Button or Phone Button.
7.4.2 Joining an Existing Group Mesh
One of the members in an Existing Group Mesh can allow new
members in Open Mesh to join the Existing Group Mesh.
A
D
C
FB
E
Existing Group Mesh
and Current Members
New Members