FreeWire
4
1 INTRODUCTION
Thank you for choosing the Sena FreeWire. The FreeWire is a Bluetooth
CB radio and audio adaptor. You can connect the FreeWire to the
motorcycle onboard audio system and make the audio system transfer
stereo audio (music, FM radio, navigation etc.) to a Sena Bluetooth
headset. The FreeWire only supports Sena Bluetooth headsets of 10
Series and above such as 20S, 10S, 10C, 10R, and 10U.
You can communicate through the built-in CB radio in the onboard
audio system using the FreeWire. Also, if you have a mobile phone
connected to the motorcycle onboard audio system by a cable, you
can have mobile phone calls using your headset.
When a rider and a passenger connect the FreeWires to each port and
pair a Sena headset to each FreeWire, they can communicate with
each other using the bike’s internal communication network.
Please read this User’s Guide carefully before using the FreeWire.
Also refer to www.sena.com for the latest version of the User’s Guide
and additional information related to Sena Bluetooth products.
The FreeWire features:
• Support for onboard built-in CB radio communication
• Wirelessly stream stereo audio to Sena Bluetooth headset
• Support for internal communication between a rider and a passenger
each using a FreeWire
• AUX input for GPS, radar detector or laser detector
• Mix the audio sources from the AUX input and the onboard audio
system
• 12V bike-powered cigarette charger with On/Off controlled by the
ignition switch
• Firmware upgradeable
Technical Specications:
• Bluetooth 4.1
• Advanced Audio Distribution Prole (A2DP)
• Operating time: 7 hours
• Battery charging time: 2.5 hours
• Lithium polymer battery
• Dimensions: 83 mm X 45 mm X 25 mm (3.3 in X 1.8 in X 1.0 in)
• Weight: 50 g (1.76 oz)
• CE, FCC, IC
To Next Page
Loading...
Need help?
General
