Sena PS110 - Trap Receiver Configuration; Management Using SNMP

29
3.2.3. Trap Receiver Configuration
The Trap receiver defines managers, which can be notified of significant events (TRAP) from the Pro
Series SNMP agent.
3.2.4. Management Using SNMP
The Pro Series can be managed through the SNMP protocol using NMS (Network Management
System) or SNMP Browser. Before using the NMS or SNMP Browser, the user must set the access
control configuration properly so that the Pro Series permits host access where the NMS or SNMP
Browser is executed. Figure 3-3 shows a screen shot of a typical SNMP browser with MIB-II OIDs of
the Pro Series SNMP agent.
Figure 3-3 Browsing MIB-II OIDs of Pro Series SNMP agent using SNMP Browser
(AdventNet MibBrowser)