40
TCP Nagle algorithm Enable/Disable
DTR option
Allow incoming connection
When DSR goes low
When DSR goes high
Port number
Max allowed connection
Inactivity timeout (0 for unlimited)
Socket ID (for outgoing connection)
Accept unlisted
Send unlisted
DTR option
UDP
DSR behavior
DTR option
DSR behavior
Phone number to host address mapping
table
CONNECT string in non-verbose mode
(ATV0) and CONNECT string in verbose
mode (ATV1)
Response to AT&Cn, AT&Wn and AT&Zn
with
Command echo delay (ms)
Default command echo
Default data mode
Modem
emulation
Init string
Add or Edit a remote host
2
Host IP address
Host port
Backup host IP address
Backup host port
Remote host
1
Remove a remote host
Cryptography
3
SSLv3
Baud rate
Data bits
Parity
Stop bits
Flow control
Serial port
parameters
Inter-character timeout (ms)
Enable/Disable modem
Modem init-string
DCD behavior
Modem
Automatic release modem connection
Enable/Disable Port logging
Port log storage location
Port log buffer size
Port logging
Display port log
Enable/Disable port event handling
Notification interval
Enable/Disable Email notification
Subject of Email
Email
notification
Recipient’s Email address
Enable/Disable SNMP notification
Port event handling
SNMP
notification
Subject of SNMP trap
1
TCP/UDP mode only.
2
A backup host and port are used when connection to main host is failed
3
TCP mode only
To Next Page
Loading...
