state precisely what the protective effect of a helmet will be in the event of an accident. Safe riding
techniques, adapted to the particular road and weather conditions, are essential for your safety.
• To provide adequate protection, the helmet must fit well and be securely fastened.
• Always fasten the chinstrap before setting off and check that the fastening system and strap are
correctly in position.
• Never ride with the chinstrap unfastened or incorrectly adjusted. The chinstrap must be correctly
positioned and must not come loose when pulled. The fastener is not correctly closed if the chinstrap
becomes loose when pulled.
• The full protective function of a helmet can no longer be guaranteed after an accident or impact. Like
the crumple zone of a car, the impact energy of a collision is absorbed by complete or partial destruction
of the structure of the outer and/or inner shell of the helmet. Because of the way helmets are designed,
this damage is rarely visible from the outside. The safety helmet is designed to absorb only one impact.
It is therefore essential to replace the helmet after a fall, accident or other violent impact. For safety
reasons, the old helmet should be rendered unusable.
• The helmet safety mechanism described above can also cause small cracks in the shell when the
helmet is dropped from a small height (less than 1 meter).
• Any helmet that has been subjected to a violent impact should be replaced.
• No helmet provides absolute protection from all conceivable impacts. This helmet has been specially
developed for motorcycle riding and is unsuitable for other purposes.
• Examine the helmet for damage at regular intervals. Small scratches will not impair the protective
function of your helmet.
• In some regions, it is prohibited by law to ride motorcycles while wearing headsets. Therefore be
certain to comply with all relevant laws in the region before using the product.
• Use of the product at a high volume for a long period of time may damage your eardrums or hearing
ability. Keep the volume at a modest level to prevent damage.
• Do not cause impact to the product or touch it with sharp tools as this may damage the product.
• Do not use the product in high-temperatures or apply heat to the product as this may cause damage,
explosion, or fire.
• Keep product away from pets or small children. It may damage the product.
• In any place where wireless communication is prohibited, such as hospitals or airplanes, turn off the
power and refrain from using the product. In a place where wireless communication is prohibited,
electromagnetic waves may cause hazards or accidents.
• Do not use the product near hazardous explosives. When it is near any explosion hazards, turn off
the power and heed any regulations, instructions, and signs in the area.
Battery
This product has an irreplaceable rechargeable battery inside. Therefore, when using the product, make
sure to adhere to the following:
• Never separate the battery from the product as this may damage the product.
To Next Page
Loading...
