We do not recommend that you change the settings if your
bike works well. Changing the settings may cause your bike to
stop working properly. If your bike doesn't work properly after
you change the settings, please return to the default settings.
Senada may change the default values in production without
notice. If you need any help, please contact us.
Changing the Top Speed
You must check your local laws and regulations to determine if
it is lawful to ride this bike on public roads before adjusting
Types of PAS
Sensor
Magnetic
steel
Types of PAS Sensor
Magnetic steel.
Controller
current limit
value
Not open to users. The
modification is invalid.
Controller
undervoltag
e value
The controller will shut down when
the voltage is lower than 39.5V.
00-turn off walk boost function
01-turn on walk boost function
To Next Page