To Next PageTo Next Page
Need help?Do you have a question about the Senco SNS41 and is the answer not in the manual?
Read and understand all operating instructions to prevent injury.
Always wear ANSI Z87.1 safety glasses and other protective gear.
Remain alert, use common sense, and avoid operating while tired or impaired.
Never use the tool in explosive atmospheres or near combustible materials.
Do not use oxygen, CO2, or other bottled gas as a power source.
Maintain proper footing and balance for better tool control.
Always assume the tool contains fasteners; do not point at others.
Avoid driving fasteners on top of others or at steep angles.
Disconnect air supply before maintenance or clearing jams.
Ensure screws are tight and check trigger for free movement.
Never use a tool that leaks air or requires repair.
Keep bystanders, minors, and visitors away from the work area.
Only trained and qualified personnel should perform repairs.
Read and understand all operating instructions to prevent injury.
Always wear ANSI Z87.1 safety glasses and other protective gear.
Remain alert, use common sense, and avoid operating while tired or impaired.
Never use the tool in explosive atmospheres or near combustible materials.
Do not use oxygen, CO2, or other bottled gas as a power source.
Maintain proper footing and balance for better tool control.
Always assume the tool contains fasteners; do not point at others.
Avoid driving fasteners on top of others or at steep angles.
Disconnect air supply before maintenance or clearing jams.
Ensure screws are tight and check trigger for free movement.
Never use a tool that leaks air or requires repair.
Keep bystanders, minors, and visitors away from the work area.
Only trained and qualified personnel should perform repairs.
General| Brand | Senco |
|---|---|
| Model | SNS41 |
| Category | Power Tool |
| Language | English |
