Sencor 3CAM 5200W - Playback and Connectivity Options; 4. PC Connection

8 EN
EN
Revision 05/2015Copyright © 2015, Fast ČR, a. s.
PC connection
An active recording sequence is indicated by aslow-fl ashing blue indicator and red dot on the
active display. Taking apicture is accompanied by the typical shutter sound from the camera
speaker.
3.7. Recording playback and viewing photos
Upon switching the mode to play, you can begin viewing fi les according your File Type
settings: Event represents events captured by the G-sensor, Video represents video recordings,
JPEG represents photos. Press Up and Down to navigate between fi les. You can view entire
video fi les – press OK to play/pause videos, Up to move back and Down to move forward.
Press Mode shortly to stop playback.
3.8. HDMI connection
Camera recordings can be played in full resolution on amonitor (TV) by connecting the proper
cable. The camera has aMicro HDMI (Type D) connector. By connecting the HDMI cable,
the camera will switch to playback mode, the display will switch off, controls work normally.
Once the HDMI cable is disconnected, the camera stays in playback mode and the display
switches on.
4. PC connection
Plug the camera into the computer USB port (Windows) using the included cable. Besides
charging the device, you can also use the cable for transferring data.
As soon as the computer detects the camera, adialog will appear prompting the user to
select between MSDC and PCCAM mode. Press Up and Down to select amode and press
OK to confi rm.
st 3CAM 5200W SENCOR EN CZ SK PL HU.indb 8 4.5.2015 18:45:5