Sencor 3CAM 5200W - 3. Start-up and Operation; microSD Card Installation and Removal; Battery Installation and Removal

EN 5
EN
Revision 05/2015Copyright © 2015, Fast ČR, a. s.
Start-up
• HDMI HD output
• Web camera
• Supports memory cards with acapacity of up to 32 GB
• Several video recording formats: 1080p / 720p
• MOV format recording
• Several camera modes: single frames, snapshots
• Thumbnails
3. Start-up
3.1. microSD card installation and removal
A. Slide the microSD card into the camera card slot with the contacts facing towards the
camera until the card lock clicks.
B. To remove the card, push the card gently until the card lock clicks and slightly slides the
card out from the slot. Use your fi ngers to remove the card completely from the camera.
Note: use your own brand name microSD card and format the card using acomputer
before use. Proper functionality is not guaranteed for non-brand name cards. The card can
also be formatted using the camera.
3.2. Battery installation and removal
Note: the battery has athin tongue allowing the user to pull out the battery from the tight
battery compartment. Do not remove the tongue.
st 3CAM 5200W SENCOR EN CZ SK PL HU.indb 5 4.5.2015 18:45:5