EN 9
EN
Revision 05/2015Copyright © 2015, Fast ČR, a. s.
PC connection
MSDC mode – connects the memory card inserted in the camera to the computer as an
external storage device. This storage device acts as any other computer hard drive and allows
copying fi les to the computer. The card contains 3 folders: EVENT represents recordings that
are events “locked” preventing them from being automatically erased when deleting older
recordings, VIDEO represents standard camera recordings, JPEG represents photos.
Note: we recommend not making any changes to fi les or memory cards while the camera
is connected to the computer. Some fi les or the entire card could become inaccessible for
the camera or even prohibit further recording to the card. In this case, the card shall be
formatted, which results in losing all data stored on the card.
PCCAM mode – can be used for video conferencing applications, e.g. Skype. Based on the
way you plan to use the device, the camera can be renamed to Siri, AP9 etc.
The computer searches for compatible drivers after connecting the device to the computer
port for the fi rst time. An internet connection will eventually be required to download
operating system updates. Wait for the installation process to fi nish. If the installation fails, try
adifferent port, or replace the cable.
Card reading – you can also remove the microSD card from the camera when switched off
and insert it into acompatible PC card reader. You can then read recorded fi les directly from
the Event, Movie, JPEG folders and save them for further processing or archiving.
st 3CAM 5200W SENCOR EN CZ SK PL HU.indb 9 4.5.2015 18:45:5
To Next Page
Loading...