Sencor 3CAM 5200W - 5. Wi-Fi Control

10 EN
EN
Revision 05/2015Copyright © 2015, Fast ČR, a. s.
Wi-Fi control
5. Wi-Fi control
The camera also allows you to completely control the recording process using your mobile
phone (Android/iPhone) via wireless connection. The on-board controls are disabled when
remote control is active.
To save energy, the Wi-Fi function is disabled by default. Enabling Wi-Fi activates the
integrated transmitter, which awaits the connection from an external controlling application,
the operation indicator fl ashes blue, adialog appears on the display that reads "Waiting
for WiFi Connecting". The Wi-Fi function is disabled after one minute if no connection is
established.
Enable Wi-Fi controls as follows:
1. Install ispocam.APK (Android) / ispocam.IPA (IPhone) on your mobile phone.
2. Enable Wi-Fi on your mobile phone.
3. Select the wireless network the name of which corresponds to your camera: “A5-A000001”.
4. The default Wi-Fi connection password is “1234567890”. Enter the right password into
your mobile phone and the camera will establish the connection. After aconnection is
successfully established, the indicator remains lit and the camera display is disabled to
save energy.
5. Run the ispocam application and after amoment, the mobile phone displays the image
transmitted by the camera and is capable of controlling the camera, recording and
able to download photos and video recordings to the mobile phone memory for further
processing.
st 3CAM 5200W SENCOR EN CZ SK PL HU.indb 10 4.5.2015 18:45:5