Sencor 3CAM 5200W - Page 17

EN 15
EN
Revision 05/2015Copyright © 2015, Fast ČR, a. s.
Camera settings
13. ISO – number on the display in camera mode
Choose between Auto (recommended)/100/200/400. Agreater number corresponds to
ahigher material sensitivity, however, it also increases picture noise.
14. Anti-shaking – hand symbol on the display in camera mode
The shutter speed is quicker when taking snapshots to reduce the effect of ashaking
hand or mat. ON / OFF options.
15. Burst – series symbol on the display in camera mode
Choose between OFF. 3/5/10 snapshots on asingle trigger push. Suitable for quick
action. Aseries of snapshots takes longer to write to the card, the operating indicator
fl ashes for the duration of this operation. Wait until the write process completes, indicated
by the indicator light permanently turned on. The card speed and number of photos
in the series infl uence the writing period, as well as the photo size (larger photos take
longer to write), fi ne setting and sharpness (fi ner and sharper photos take longer to write).
16. Sharpness
The sharpness of photos after being taken can be affected using the Strong, Normal
(recommended) and Soft.
17. Date & Time
Use the Up and Down arrows to set the date and time, move between items by shortly
pressing the Mode button.
st 3CAM 5200W SENCOR EN CZ SK PL HU.indb 15 4.5.2015 18:45:5