Sencor 3CAM 5200W - Page 18

16 EN
EN
Revision 05/2015Copyright © 2015, Fast ČR, a. s.
Camera settings
18. Power Save
Set the period after which the display turns off. The available options are OFF (the
display is always on), 10 sec, 30 sec, 1 min. The display will turn off after the confi gured
period, the camera continues in executing the previous activity. The display will turn back
on by shortly pressing the OK, Up or Down buttons.
19. Rotate
The user interface (information messages on the display) can either be fi xed (OFF) and
can therefore be upside down when the camera is rotated, or the texts can rotate (ON)
when the camera is turned to ensure legibility. The captured image remains intact.
20. Wi-Fi password
The pre-set Wi-Fi connection password is “1234567890” can be changed to acustom
password consisting of letters and numbers.
21. BEEP
Pressing buttons can be accompanied by beeps (On) or can be beeps can be disabled
(Off).
22. Language
Choose from one of several user interface languages.
23. Light Freq
Camera use under artifi cial light circumstances can be affected by lights fl ickering at
network frequency, which your eye would not normally register, but your camera will.
Choose 50 Hz/60 Hz according to your conditions.
st 3CAM 5200W SENCOR EN CZ SK PL HU.indb 16 4.5.2015 18:45:5