Sencor 3CAM 5200W - Page 19

EN 17
EN
Revision 05/2015Copyright © 2015, Fast ČR, a. s.
Camera settings
24. Delay Shutdown
If this setting is set to On, the camera does not perform any operation for approximately
1minute, the camera is switched off to save energy.
25. File Type
Determine the fi les to be played in playback mode. Event represents events captured by
the G-sensor, Video represents video recordings, JPEG represents photos.
26. Format
This feature allows you to format the inserted card to be used in the camera.
Aconfi rmation request will appear Yes=Enter, or No=Cancel.
ATTENTION! Formatting will delete all previous contents of the memory card forever!
27. Delete File
To delete unnecessary fi les, choose between Delete This File?, which deletes the last fi le,
or the next fi le back. Or Delete All Files? The delete process shall be confi rmed Yes or No
28. Factory reset
Sets all items to the factory pre-sets. This is useful if you would like to return to the
default status for multiple settings. Confi rm with Enter or cancel by pressing Cancel.
29. System information
Lists information about the currently used system.
st 3CAM 5200W SENCOR EN CZ SK PL HU.indb 17 4.5.2015 18:45:5